Call 08046054497 68% Response Rate
Send Enquiry
Mitsubishi Servo Drives
Schneider Servo Drives
Product Brochure
| Rated Power | 100 W |
| Output Power | 100 W 220 V |
| Output Current | 2.7 A 220 V |
| Input Voltage | 220v 1ph |
kerala, kochin, chennai, coimbatore
View Complete details
Machine Servo drives
| Phase | Three Phase |
| Brand | mitsubishi |
| Torque | 4.5 nm |
| Output Power | 2 kw |
| Output Current | 15 A |
| Input Voltage | 220 V AC |
| Model Name/Number | MR JE 70B |
| Motor Type | PULSE TYPE |
| Speed Range | 3000 RPM |
| Heat Dissipation | 45 C |
MR-JE-70B. Digital AC-Servo Amplifier MR-JE, for Rated Motor Power up to 700 W, SSCNETIII/H. Standard Material; Logistic Class: A.
MR-JE VAC Servo Amplifiers are available in up to 2 kW and accept either pulse train or analog interfaces in one single model that is designed for quick,
View Complete details
MR-JE-70A Mitsubishi Drives
Product Brochure
This high performance servo amplifier combines proven reliability with a 2.0kHz high frequency response and an energy saving design.
Offering best in class performance with the setup ease of advanced one-touch tuning, it's the solution for all kinds of machines and applications.
View Complete details
MR-JE-300A Mitsubishi servo motor
Product Brochure
| Torque | Rated speed: 2000r/min |
| Output Power | Rated output: 5.0kw. |
| Output Current | 11A |
| Input Voltage | 220V AC |
| Model Name/Number | MR-JE-300A |
AC Motion Servo drive unit / amplifier - Mitsubishi Electric (MELSERVO JE Series) - Supply voltage 200Vac (3-phase input / 200Vac-240Vac) - Rated power 3000W / 3kW - with Encoder input (17-bit / 131072pulses/revolution resolution) - with RS-422 / RS-485 communication capability - IP20 - with Built-in dynamic brake + Built-in regenerative resistor + Forced ventilation cooling - USB connector - compatible with HG-SN302J - rated for 0-55°C ambient
View Complete details
FX3S-20MR-ES Mitsubishi PLC
| Manufacturer Series | MELSEC-F Series |
| Output Type | Transistor |
| Dimensions (W x H x D) mm | 90 x 90 x 86 |
| Maximum Voltage Drop at ON | 24 v dc |
| Allowable Supply Voltage Range | 24v dc |
Main Unit AC Power Type FX3S-MR/ES FX3S-MT/ES FX3S-MT/ESS FX3S-30MR/ES-2AD FX3S-30MT/ES-2AD FX3S-30MT/ESS-2AD DC Power Type FX3S-MR/DS FX3S-MT/DS FX3S-MT/DSS Display Module FX3S-5DM Memory Cassette FX3G-EEPROM-32L
View Complete details
Allen Bradley PLC Panel
Product Brochure
| Voltage | 220V |
| Rated Power | 2 HP |
| Phase | Single Phase |
View Complete details
MR-JE 200A Servo Amplifiers
Minimum Order Quantity: 10 Piece
| Voltage | 220V |
| Phase | Three Phase |
| Brand | Servo |
| Body Material | MS |
| Weight | 2.3Kg |
| Frequency | 50Hz |
Rated output: 7.0kw.
Interface type: general pulse interface type.
Power specification: three phase AC400V.
Pulse train and analog input as universal interface.
Can choose the position, speed and torque control mode.
The use of advanced tuning features such as advanced vibration suppression control and adaptive filter,
Greatly improve the performance of the machine MITSUBISHI MR-JE-10A MR-JE-10A
MR-J3, your partner.
Higher performance, more features, more convenient to use.
Highest performance in the industry.
Speed response frequency up to 2.1kHz. Servo motor series: low inertia, medium and large capacity.
Rated output: 20.0kw.
Rated speed; 1000r/min.
Electromagnetic brake: No MITSUBISHI MR-JE-10A.
Power supply: 200V.
Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation.
Improve the environmental performance of HG-SR, HG-JR series of products using IP67.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
100 scene, there are 100 different drive control MITSUBISHI MR-JE-10A.
In order to meet the needs of the diverse and detailed field,
MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products.
Can meet the different needs of different customers. Servo motor series: low inertia, medium / high power.
Rated output: 12.0kw.
Rated speed: 1000r/min.
Electromagnetic brake: with.
Shaft end specification: Standard (straight axis).
Voltage: 400V level.
Features: low inertia has low medium and high speed three models, suitable for different applications as a standard, 30KW and above seervo motor can be installed flange or bracket MR-JE-10A.
IP level: IP44.
Application example:
1, injection molding machine.
2, semiconductor manufacturing equipment.
3, large material handling system.
4, stamping machine.
Abundant motor product linee can optimize the performance of the machine MR-JE-10A.
Has a rich motor product line including a rotary servo motor, linear servo motor and direct drive moto
View Complete details
MR JE 100A Mitsubishi Servo Amplifier
Product Brochure
| Brand | mitsubishi |
| Output Power | Three-phase or single-phase AC170 V ~ 264 V |
| Output Current | Rated current (Note 15) [A] : 2.6 |
| Input Voltage | AC170 V ~ 264 V |
| Permissible Frequency Fluctuation | Test pulse input (STO) (Note 7) : Test pulse interval: 1 Hz ~ 25 Hz, test pulse off time: Up to 1 ms |
MR-J4-40BMR-J4-GF/B/A servo amplifier is compatible with a two-wire type serial linear encoder. For four-wire type serial linear encoders and pulse train interface .
Servo amplifier built-in regenerative resistor (Note 2, 3) [W] : Ten
External regenerative resistor (standard accessory) (Note 2, 3, 11, 12) [W]: -
Dynamic brake: Built-in (Note 4)
SSCNET / H command communication period (Note 10) : 0.222 ms, 0.444 ms, 0.888 ms
Communication function : USB: connection to a personal computer (MR Configurator2 correspondence)
Encoder output pulse : Correspondence (ABZ-phase pulse)
Analog monitor: 2 channel
Full-closed control : 2-wire communication method (Note 9)
Machine end encoder interface: Mitsubishi high-speed serial communication
Servo function: Advanced vibration suppression control , adaptive filter , robust filter, auto-tuning, one-touch adjustment, tough drive function, drive recorder function, control the pushing, machine diagnostic functions, the power monitor function, the master slave operation function (Note 14), scale measurement function (Note 14), J3 compatibility mode, super trace control (Note 16), lost motion correction function (Note 16)
Protective function : Over-current cut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheating protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, excessive error protection, magnetic pole detection and protection, linear servo control error protection
Safety feature: STO (IEC / EN 61800-5-2)
Third party certification standards : EN ISO 13849-1 Category 3 PL e, IEC 61508 SIL 3, EN 62061 SIL CL 3, EN 61800-5-2 (Note 20)
Response performance : 8 ms or less (STO input off energy cut-off)
Test pulse input (STO) (Note 7) : Test pulse interval: 1 Hz ~ 25 Hz, test pulse off time: Up to 1 ms
Expected average dangerous failure time (MTTFd) : MTTFd 100 [year] (314a)
Diagnostic coverage (DC): DC = medium (Medium), 97.6 [%]
The average probability of a dangerous failure (PFH) : = 6.4 × PFH 10 -9 [1 / H]
Overseas Compliance: The correspondence to the international standards and laws.
Structure (protection grade) : Self-cooling, open (IP20)
View Complete details
Mitsubishi MR-JE-200A Servo Drives
Product Brochure
| Brand | Mitsubishi |
| Torque | Maximum torque [N-m]: 14.3 |
| Output Power | Rated output: 2.0kw. |
| Output Current | 11A |
| Input Voltage | 220V AC, 3PH |
| Input Phase | 3 - Phase |
| Model Name/Number | MR-JE-200A |
| Interface | USB, R- 422, R-485 |
| Ambient Operating Temperature | 0 Degree C to 55 Degree C |
| Ambient Operating Humidity | 5 to 90 % RH |
| Altitude | 2000 m or Less Above Sea Level |
| Rated Output Current | 11 A |
| Control Method | Sine-wave PWM Control, Current Control Method |
| Weight | 2.1 Kg |
| Rated Output Voltage | 175 V AC |
| Positioning Mode | Point Table Method, Program Method |
| Analog Monitor | 2 Channels |
| Structure | Force cooling |
| IP Rating | IP20 |
| Power Supply | 200 to 240 V AC |
| Dynamic Brake | Built-in |
MITSUBISHI MR-JE-200A Product information and technical parameters：
Brand: MITSUBISHI
Name: amplifier
Model: MR-JE-200A
MITSUBISHI universal AC servo amplifier MELSERVO-JE series.
Rated output: 2.0kw.
Interface: General purpose.
Compatible motor: HG-KN202J-S100, HG-KN202BJ-S100, HG-KN152J-S100, HG-KN152BJ-S100.
MR-JE-A is equipped with a positioning function!
Be able to realize the positioning of the point set list and the way of the program.
At the same time, it also has a simple cam, encoder to follow, mark detection and other equipment can achieve high performance of the advanced functional group.
Without positioning module, the controller can build a positioning system, which can simplify the system.
Command interface using DI/O and RS-422/RS-485 serial communication (maximum 32 axis),
Can simply set the positioning data through the Configurator2 MR.
View Complete details
Mitsubishi MDS-C1-V2-2020
| Input Voltage | 200V AC |
| Rated Power | 2 HP |
| Permissible Frequency Fluctuation | 400HZ |
| Positioning Feedback Pulse | PULSE |
| Service Mode | The MDS-C1-V2 |
| IP Rating | 25 |
| Positioning Mode | 5 |
| Control Method | 4 |
| Frequency | 50Hz |
View Complete details
EXPLORE MORE CATEGORIES